Picture of ToughSonic 14 Ultrasonic Level & Distance Sensor

Show details for ToughSonic 14 Ultrasonic Level & Distance Sensor

The ToughSonic 14 is a rugged ultrasonic level AND distance sensor. The ToughSonic 14 has built-in 0-10VDC, 4-20mA, and choice of RS-232 or RS-485 serial communications. The ToughSonic 14 also has built-in sourcing or sinking switches to control relays, alarms, motors, sirens, and more. All ToughSonic sensors are IP68 rated, and the ToughSonic 12 is built in a 316 stainless steel housing, with potted in and protected PUR cable and electronics. Available with 30mm or 1 inch NPT threads, and also available as Serial Only (no analog outputs or switches)
 
<h2>Specifications</h2>
 
Maximum Range 14 feet (4.3 meters)
Optimum Range 4 inches to 10 feet, 100 mm to 3 meters
Temperature -40° to 158° F (-40° to 70° C)
Humidity 0 to 100% operating
Protection NEMA-4X, NEMA 6P, IP68
Transducer Ruggedized piezoelectric
Compensation Temperature compensated (selectable in SenixVIEW)
Resolution Serial data: 0.0034 in. (0.086 mm), Analog steps: 4099 (0-10 VDC), 3279 (4-20 mA) Repeatability Nominal 0.2% of range @ constant temp. Affected by target, distance, environment Update Rate 20 Hz (50 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections
Specifications are subject to change without notice.
 
<h2>Outputs</h2>
 
Output #1 Default: 4-20 mA; SenixVIEW configurable
Alternate: Configure it as a switch output
Output #2 Default: Voltage, SenixVIEW configurable
Alternate: Configure it as a switch output
Voltage Output 0-10, 0-5 VDC or SenixVIEW configurable, 10 mA maximum
4-20 mA Current Loop Current sourcing, SenixVIEW configurable. Maximum loop resistance 450Ω
Switch Output(s) Output #1 and/or #2 can be a switch. Each can be sinking (NPN) or sourcing (PNP)
Max ratings: 150 mA @ 40 VDC
Each has adjustable setpoint, polarity, hysteresis, window, time delays and more
RS-232 or RS-485 Modbus &amp; streaming protocols, 9600-115200 baud (configurable) 8 data bits, 1 stop, no
parity RS-485 permits multi-sensor networks. Part number determines interface
SYNC feature Permits multiple sensors to operate in close proximity without cross-talk
Not usable concurrently with serial data
 
<h2>Mechanical</h2>
 
Housing 316 stainless steel for corrosion resistance, Usable in salt water, H2S environments
Mounting(30 mm) Through hole in bracket or panel. Two jam nuts included. Stainless &amp; nylon brackets
available. Adapters to 1-1/2 in and 2 in NPT available
Mounting (1-in NPT) Typically for tank mounting. Mates with 1-in NPT female thread
Attached Cable 6.5 feet (2 meters), PUR jacketed. Custom lengths available. Standard models: 6-wire
shielded + drain. Serial data only models: 4-wire + drain, dual twisted shielded pair
Total Weight 30 mm: 10.4 oz. (0.29 kg)
1-in NPT: 14.2 oz. (0.40 kg)
Weights include 2 m cable

ToughSonic 14 Ultrasonic Level & Distance Sensor

<img src="https://405tw2gjmh51a89qq33xrui1-wpengine.netdna-ssl.com/wp-content/uploads/toughsonic-14-logo.png">Maximum Range 14 Feet (4.3 Meters) <h2>ToughSonic 14 Ultrasonic Sensor Features</h2><ul><li>Long range — small housing</li><li>Rugged construction, IP68 rated</li><li>Indoor or outdoor uses</li><li>Straight or tapered thread options</li><li>Two outputs plus serial data</li><li>Serial data-only models</li><li>Temperature compensation options</li><li>Push-button TEACH capability</li><li>PC configurable with free SenixVIEW software with nearly 80 sensor parameters that can be changed to tailor the sensor to your application </li></ul> <h2>ToughSonic 14 Ultrasonic Sensor Best Applications</h2><ul><li>Tank levels of benign liquids</li><li>Open channel flow – flumes , weirs</li><li>Roll diameter and web loop control</li><li>Outdoor applications to 10-ft (3 m)</li><li>Object presence/absence status</li><li>Object positioning</li></ul>

Senix

Absolute rotary encoder I Optical I Precizika I AK58HE1

AK58HE1 is an absolute rotary encoder that comes in blind or through hollow shaft mechanical options. It has up to 40 bit multiturn resolution with SSI interface or up to 24 bit resolution using BiSS C output.

Absolute rotary encoder | Optical | AK58HE1

Precizika Metrology

Absolute rotary encoder I Optical I Precizika I AK36HME1

AK36HME1 is a photoelectric absolute encoder that is available in singleturn and multiturn (battery buffered) versions. The encoder has up to 21 bit resolution in singleturn option and up to 40 bit resolution when using the multiturn version. It outputs the signal through BiSS C or SSI interface and has a blind hollow shaft.

Absolute rotary encoder | Optical | AK36HME1

Incremental rotary encoder I Elgo I Optical I15.32

Incremental rotary encoder | Optical | 15.32

<ul class="list-square">
<li>10 ... 24 VDC</li>
<li>1... 360 pulses/revolution (standard), 120... 360 pulses/revolution (with zero-pulse)</li>
<li>Max. 10 KHz (more on request)</li>
<li>Double ball bearing</li>
<li>IP54 standard (IP63 optional)</li>
<li>Weight 144 g</li>
<li>Diameter of housing 45 mm</li>
<li>Diameter of flange 45 mm</li>
<li>Shaft diameter 6 mm</li>
</ul>

Elgo Electric

Incremental rotary encoder | 50B

<ul class="list-square">
<li>Industry 50 mm Standart Size, Clamping Flange</li>
<li>Robust Mechanical and Electrical Construction</li>
<li>Protection up to IP67</li>
<li>Up to 5000 PPR max.</li>
<li>&lt;300 kHz frequency</li>
</ul>

Fenac Engineering

Show details for Displacement Sensor

Displacement sensing, especially in aggressive applications, can be a real challenge. The choice between non-contact sensors requiring a clean and predictable environment, and cylinder-based sensors being sensitive to vibration and misalignment, can make the choice difficult. Our displacement sensors combines the robustness of non-contact sensors by being solid-state while enabling measurement in “dirty” and unpredictable applications.
Your installation, operation, maintenance effort and cost can be substantially reduced as there is no need for special mounting, protection or cleaning of the sensors. Our displacement sensors add value in a wide variety of applications, including those within structural health monitoring, factory automation and off road vehicles, to mention just a few.
Our sensors enable:
• Condition monitoring
• Predictive maintenance
• Damage prevention
• Feedback control

Displacement Sensor

Industrial displacement sensors for rough applications.

ElastiSense ApS

Picture of ToughSonic CHEM 12 Level & Distance Sensor

Show details for ToughSonic CHEM 12 Level & Distance Sensor

The ToughSonic CHEM 12 is a rugged ultrasonic level AND distance sensor. The ToughSonic CHEM 12 has built-in 0-10VDC, 4-20mA, and choice of RS-232 or RS-485 serial communications. The ToughSonic CHEM 12 also has built-in sourcing or sinking switches to control relays, alarms, motors, sirens, and more. All ToughSonic sensors are IP68 rated, and the ToughSonic CHEM 12 is built in a PVDF housing for chemical applications, with potted in and protected PUR cable and electronics. The ToughSonic CHEM 12 has 1.5 inch NPT bottom mounting threads and 1 inch NPT top mounting threads, and also available as Serial Only (no analog outputs or switches)
<h2> </h2>
<h2>Specifications</h2>
 
Maximum Range 12 feet (3.66 meters)
Optimum Range 4 in. to 10 ft (100 mm to 3 meters)
Temperature -40° to 158° F (-40° to 70° C)
Humidity 0 to 100% operating
Protection NEMA-4X, NEMA 6P, IP68
Transducer Chemically isolated piezoelectric
Compensation Temperature compensated SenixVIEW selected options
Resolution Serial data:0.0034 in. (0.086 mm) Analog steps: 4099 (0-10
VDC), 3279 (4-20 mA)
Repeatability Nominal 0.2% of range @ constant temp. Affected by
target, distance, environment
Update Rate 20 Hz (50 ms), SenixVIEW adjustable; affected by
SenixVIEW filter selections
Specifications are subject to change without notice.
 
<h2>Outputs</h2>
Voltage Output 0-10, 0-5 VDC or SenixVIEW customized. Maximum output current 10 mA
Current Loops (x 2) Two 4-20 mA current loops:
Current sourcing and current sinking
Max loop resistance 450 ohms each
SenixVIEW customized
Both share calibration parameters
Switches (x 2) Two switches, SenixVIEW customized
150 mA max @ 40 VDC max
SenixVIEW selected as sinking (NPN) or sourcing (PNP)
Adjustable setpoint, polarity, hysteresis, ON timing, OFF
timing
Serial Data Interface Modbus &amp; streaming protocols, 9600-115200 baud
(configurable), 8 data bits, 1 stop, no parity
RS-485 permits multi-sensor networks
Part number determines interface
 
<h2>Mechanical</h2>
 
Housing Injection molded, chemically resistant Polyvinylidene fluoride (PVDF)
Also known as Kynar, a registered tradename of Arkema Inc.
Mounting Top mount: 1-inch NPT
Bottom: 1-1/2 in. NPT
Cable Potted into sensor, pigtail termination. 6.5 feet (2 meters), PUR
jacketed. Custom lengths available
Standard models: 9-wire shielded + drain
Serial data-only models: 4-wire + drain, dual twisted shielded pair
Weight 21.2 oz. (0.60 kg)
Weight includes 6.5 ft (2 meter) cable

ToughSonic CHEM 12 Level & Distance Sensor

<img src="https://405tw2gjmh51a89qq33xrui1-wpengine.netdna-ssl.com/wp-content/uploads/TOUGH-SONIC-CHEM-12-logo-500x81.png">Maximum Range 12 Feet (3.66 Meters) <h2>ToughSonic CHEM 12 Level Sensor Features</h2><ul><li>More compact design</li><li>Smaller diameter transducer&nbsp;– easier installation when space is limited</li><li>Shorter design&nbsp;– Measure closer to the top of a tank</li><li>Robust Strain Relief&nbsp;</li><li>Non-contact level measurement</li><li>Rugged construction, IP68 rated</li><li>Indoor or outdoor uses</li><li>Top and bottom mounting threads</li><li>Five outputs plus serial data</li><li>Serial data-only models</li><li>Temperature compensation</li><li>PC configurable with free SenixVIEW software with nearly 80 sensor parameters that can be changed to tailor the sensor to your application </li></ul> <h2>ToughSonic CHEM 12 Level Sensor Best Applications</h2> <ul><li><a href="https://www.senix.com/applications/tank-level-applications/" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(190, 71, 24);">Chemical tank levels</a></li><li>Benign liquid tank levels</li><li>Tanks up to 12-ft (3.66 m) tall</li><li>1.5 in NPT bottom thread, 1.0 in. NPT top thread</li></ul>

Incremental linear encoder I Optical I Precizika I L18

Photoelectric linear encoder L18 is an incremental linear displacement measuring device that can have up to 2.040 measuring length, grating period of ±20 µm or ±40 µm  and accuracy that can reach up to 3 µm.

Incremental linear encoder | Optical | L18

Accelerometer Gyroscope SCC1300-D04-004

Minimum Operating Supply Voltage: 3 V, 4.75 V 
Package Type: SMD 
Mounting Type: Surface Mount 
Sensor Type: Accelerometer, Gyroscope 
Pin Count: 32 
Interface Type: SPI 
Sensitivity: 18 °/s/LSB, 650 LSB/g 
No. of Axis: 3 
Technology: Digital

MURATA

We are continuously improving performance to provide good quality, error-free products at reasonable prices.

A world class supplier of force measurement solutions across a wide range of sectors

Our excellence in innovation has allowed us to produce the smallest encoder on the market.

We consistently supply high quality products and services that meet or exceed our customers quality standards.

The Toughest, Most Versatile and Flexible Ultrasonic Level and Distance Sensors Available. 

Connecting machine builders to trusted suppliers

Product categories

Rotary encoders

Linear Encoders

Distance sensors

Gyroscopes

Displacement Sensors

DeadStock

Digital cameras

Thermal imaging cameras

Quality sourcing made simple

Increase your global exposure

Testimonials

With help from SourceMe, we were able to connect with a new customer that can become a key account for our business.

Become a beta tester

Information

Contact

Email

Address

Follow Us