ADB Series Bearing Sensors
- Screw in positive mount installation
- Grease zerk for bearing lubrication
- Adjustable depth probes (50, 100, 200 & 300mm)
- ADB81 – 1/4″ BSPT mounting thread with cable entry
- ADB2 – 1/8” NPT mounting thread with conduit entry
- NTC or PT100 thermistor – continuous temperature monitoring
Description
The ADB series have been designed to allow the depth of the sensor to be
adjustable depending on your application. A number of versions are
available with probe lengths of 50, 100, 200 and 300 mm. The sensors
screw directly into a bearing housing through a 1/4” BSPT threaded
grease zerk. Each sensor is fitted with a grease zerk to allow
lubrication of the bearing without the need for removal of the sensor.
The ADB series have NTC or PT100 type thermistors which allow for
continuous temperature monitoring.
The sensor is supplied with a 3m attached cable and can be connected
to a PLC or to a hazard monitoring system, such as 4B’s Watchdog Super
Elite, T500 Hotbus Elite or T400 NTC Elite. The connections are not
polarity sensitive therefore special connection requirements are
eliminated, and the cable can be extended in the field.
General Inquiries
There are no inquiries yet.
0.0 Average Rating Rated (0 Reviews)